2016+ TACOMA WITH 8″ REAR, AUTOMATIC W/OUT E-LOCKER NITRO GEAR PACKAGE, SELECT RATIO

Description

016 Toyota Tacoma Automatic – without OEM E-Locker Nitro Front & Rear Gear Package Kit Select Ratio

Fits:

2016 & Newer Toyota Tacoma 4×4 SR, SR5, TRD Sport, Limited

• *Does not fit trucks with Manual trans or Rear OEM Diff lock.
• *Does not fit TRD Offroad or TRD Pro. You need: GPTACO2016-8.75

Additional options

Front Locker: ARBRD111

Rear Options: ARBRD132

TORS-TV6-30 (Limited Slip Differential)

Recommended:
6 quarts of Nitro Synthetic Plus Gear Lube

Tech Note:

Includes Rear Carrier bearings for Aftermarket LSD, Locker, etc. If running factory carrier, you will need 2x TOY90366-53004

Must re-use factory rear carrier bearings. 

Fits with 8″ Rear. Fits factory OEM carrier or ARB RD111. 

Solid Preload spacer replaces stock type crush sleeve improving bearing preload retention, eliminating possible crush sleeve damage if the yoke is impacted offroad, and allows the pinion seal to be serviced without complete disassembly of the differential to replace a crush sleeve and reset pinion bearing preload. 

-Nitro Master kits include name brand OE quality bearings.

Nitro Complete Gear Package Includes:

• Front ring & pinion
• Front Master Install Kit*
• Rear ring & Pinion
• Rear Master Install Kit*
• *Includes Rear Carrier Bearings for aftermarket carrier. (not shown)
• *Including upgraded solid pre-load spacers

Testimonial: If you have been driving your 2016 Tacoma with oversized tires, then you are probably disappointed with the new engine combo, but with proper gearing, they are actually very nice. Nitro gear recently fitted the first set to the XOVERLAND 2016 Tacoma, which is fully outfitted and includes an AT Overland Habitat (camper). Rachelle and Rhonda complained that the new truck was constantly shifting and burning through a ton of fuel, that it “just didn’t feel right.” Installing the new 4.88 ratio Nitro gears resulted in an immediate improvement in driveability and later a 3-4 mpg increase on their 10-hour drive home.

Suffering from poor performance and reduced fuel economy resulting from oversized tires?

A Nitro gear change will help get that performance and economy back! 

If you’ve fitted larger tires to your vehicle then you are likely experiencing a loss in performance, fuel economy, and more constant transmission gear “hunting” – This is because the larger tires reduce your engine’s RPMs below the optimal power band. Re-gearing the differentials in your vehicle is the only way to get your vehicle back into its optimal operating RPM range, thus improving performance and reducing strain on your vehicle’s drivetrain. This is especially important for today’s vehicles as they feature tall factory gearing and overdrive transmissions which are less tolerant to increase in tire size or the weight of added accessories. 

It’s a common misconception that gear changes are reserved only to hardcore off-roaders or trucks with huge tires. However, re-gearing is one of the single most beneficial modifications you can make to keep the performance, economy, and durability of your daily-driven 4×4. This is a mod for anyone with larger tires, increased weight, or increased performance on stock vehicles for towing or increased acceleration.

Nitro Gear Package for 16 Toyota Tacoma is one of Nitro’s biggest sellers because these trucks need to be regeared. The Tacoma has a very tall overdrive in 5th AND 6th gear to turn low RPMs. The new 3.5l V6 makes plenty of horsepowers but needs to reach its powerband. Even with stock tires we have found the 6th gear is nearly useless, the gearing is so high that the transmission is constantly shifting. In a STOCK Tacoma, Automatic 6th gear puts you at ~1500 RPM @ 60MPH. This simply does not work. You may not realize it, but you probably are hardly ever in 6th gear unless you are almost going downhill. By regearing, you can bring the motor back to the RPM it needs to be. This will improve Economy, Performance, and shifting. This is one of the most important modifications you can make to your late model Tacoma whether on a stock truck, or especially when running an oversized tire. This is the only way to properly compensate for inadequate factory gearing and the increase in tire diameter. We often hear people are worried they will turn high rpm’s if they regear. This is simply not the case. Remember, the auto trans has a double overdrive. See the below examples: Example Stock 2019 Tacoma TRD Offroad w/ Auto Trans: 

3.91 & Stock Tire, ~1500 RPM @ 60 MPH, ~1750 RPM @ 70 MPH (NOT ENOUGH RPM!)
4.88 & Stock Tire, ~1950RPM @ 60 MPH, ~2200 RPM @ 70 MPH
33” 4.88, ~1750 RPM @ 60 MPH, ~2000 RPM @ 70 MPH)
33” 5.29, ~1900 RPM @ 60 MPH, ~2250 RPM @ 70 MPH)
*Manual trans RPM figures will be higher.

Features

• 2 Year warranty

Nitro Rings & Pinions:

8620 Steel Gear Forgings

• Precision Machining 
• CNC Triple-lapping
• Heat Treatment 
• Rockwell Harness Tested

Nitro Master Install Kits: 

• Koyo 

Warranty

*All Nitro Gear & Axle brand products are warranted to be free of manufacturer defects for the specified period. Warranty requests must be made by the original purchaser and submitted by the dealer purchased from. Any parts sent for warranty consideration must be pre-approved and shipped prepaid freight to our facility with a copy of RGA for our inspection & determination. We will not pay for labor, shipping cost, loss of revenue or perishable goods, commercial losses, costs of telephone calls, shipping, or general inconvenience. This is our only warranty expressed or implied. Unauthorized warranty returns may be refused. The warranty generally covers MFG defects in material or workmanship. Abuse, overloading, improper lubrication, misuse, commercial or competition use voids warranty. Normal characteristics are not warrantable, such as Gear whine. Minor cosmetic flaws, dings, burrs from shipping or manufacturing, are not considered a defect, it is installer responsibility to address these at time of install. The customer is responsible for shipping charges if the warranty is granted. Warranty is for the original purchaser/user, is not transferable. The warranty covers one replacement or credit solely at our discretion. Warranty determinations are at our sole discretion.

In addition to the above conditions, see special notes for these products:

Ring & Pinion – Warrantied against manufacturing defects. 2 years from the date of purchase. Must provide set-up specs.

Chromoly front Axles, Excalibur Joints, 30/30 Birfield kits – Warrantied against manufacturing defects for the life of the vehicle. These products are also covered for Breakage. The Shaft/joint must be BROKEN. Wear, twisting, bending are not warrantable. Damages caused by the failure of other parts are not warrantable, for example, broken U-joint (other than Nitro Excalibur) causing damage to Axle ears.

Rear Chromoly Axles – Warrantied against manufacturing defects for 5 years. These products are also covered for Breakage. The Shaft must be BROKEN. Worn, twisted, or bent axles are not warrantable.